rajeevkaza
10-31 01:12 PM
where did you see these 30/45 days numbers? you can apply an H1 extension upto 180 days in advance of the expiry of your current H1 (basically 180 days before the new start-date)
Let me clarify you guys, 180 days advance to expiry is good, I am referring to applying in the last minute, ideally it should be atleast 30 days ahead of expiry date in order to avoid the complications.
Secondly I am referring to applying for H1B Extension AFTER Expiry date which is good for 45 days. Hope you got it now.
Let me clarify you guys, 180 days advance to expiry is good, I am referring to applying in the last minute, ideally it should be atleast 30 days ahead of expiry date in order to avoid the complications.
Secondly I am referring to applying for H1B Extension AFTER Expiry date which is good for 45 days. Hope you got it now.
wallpaper Black Pistol (Gun) and Knife
coopheal
03-05 04:44 PM
I had two soft LUDs on 3rd and 4th of March. Did anyone else also have similar LUDs recently?
I know my PD is not current so nothing really going to happen.
I know my PD is not current so nothing really going to happen.
gparr
November 25th, 2005, 04:38 PM
My primary tip is patience. When the wind is blowing, even slightly, if you're patient you will start to get in tune with the wind and be able to pick out the calm moments that always occur. You just have to be ready and then get off as many shots as possible during that calm moment. I shoot as many of my flower shots as I can very early or very late in the day. By very early, I mean at or just after sunrise. The wind is usually calm for a short while until the sun starts to heat the admosphere. I've had considerable success shooting in the very soft light at or after sunset, when the wind also calms. Long shutter speeds though. Unfortunately, too many blooms aren't open until the sun is higher in the sky and you have to resort to patience.
I've also had great success with a trick Don Bevis shared. You can get thin bamboo sticks in bundles for just a couple of dollars at your local nursery. Get the longer ones. I always carry two of them with me and stick them in the ground so that they apply slight pressure to the plant stem. This cuts down considerably on the movement. Don't know where Don learned the trick, but it works.
Some use a tool called a Plamp. See it here (http://www.naturephotographers.net/gs/gswimplamp.html) I've never used one, though have been tempted. The fear I have is that any clamping device will damage the plant. I shoot a lot in the gardens of several neighbors and at the Chicago Botanic Garden and make it a point to never leave any trace of my having been there. In other words, no footprints in the flower beds, no damaged plants, nothing. Don's trick works so well because it steadies the plant without causing any damage. It doesn't always work, but it does so often enough that it's worth hauling the sticks around.
I've also read several threads on other sites where people describe using "tents" to both diffuse the light and to stop the wind. I don't have any links for solid techniques, but will try to find some. It's tempting, though yet another piece of gear to carry.
These days I make heavy use of my 5-in-1 disk for diffusion and reflection. I have the 22-in. Photoflex Multidisc (http://www.bhphotovideo.com/bnh/controller/home?O=breadCrumb&A=search&Q=&ci=6196), which I like a lot. It's excellent for a lot of light control purposes and sometimes serves as a good wind block. There are cheaper ones, but Kevin Sadler talked me into spending more money to get a quality product and I haven't regretted it.
When all else fails, I resort to flash to get the shot. I greatly dislike using flash and only use it when I want a shot and know that it's get it now or never. If I can come back and get the shot at a calmer time without flash, I will. I do use flash on occasion if I feel that the shot needs a little spark of light, but generally not. Flash is always used on a remote cord and diffused in some way, either with the wide-angle diffuser that's built into it, or by shooting through or bouncing it off of my multidisc.
As for shooting technique, a tripod is a must. I have two, but the one I use for flower shots allows me to splay the legs out and get the camera very low and/or allows me to reverse the column (I bought a short column to replace the one that came with the tripod) and hang the camera upside down. I use a ball head with a quick release. I also almost always use a remote release and frequently use mirror lock up. It's amazing how many images I've ruined because I moved the camera by pushing the shutter button or vibration from the mirror cause the slightest blur.
But above all, getting flower shots just requires a lot of patience. Hope all of this rambling helps.
Gary
I've also had great success with a trick Don Bevis shared. You can get thin bamboo sticks in bundles for just a couple of dollars at your local nursery. Get the longer ones. I always carry two of them with me and stick them in the ground so that they apply slight pressure to the plant stem. This cuts down considerably on the movement. Don't know where Don learned the trick, but it works.
Some use a tool called a Plamp. See it here (http://www.naturephotographers.net/gs/gswimplamp.html) I've never used one, though have been tempted. The fear I have is that any clamping device will damage the plant. I shoot a lot in the gardens of several neighbors and at the Chicago Botanic Garden and make it a point to never leave any trace of my having been there. In other words, no footprints in the flower beds, no damaged plants, nothing. Don's trick works so well because it steadies the plant without causing any damage. It doesn't always work, but it does so often enough that it's worth hauling the sticks around.
I've also read several threads on other sites where people describe using "tents" to both diffuse the light and to stop the wind. I don't have any links for solid techniques, but will try to find some. It's tempting, though yet another piece of gear to carry.
These days I make heavy use of my 5-in-1 disk for diffusion and reflection. I have the 22-in. Photoflex Multidisc (http://www.bhphotovideo.com/bnh/controller/home?O=breadCrumb&A=search&Q=&ci=6196), which I like a lot. It's excellent for a lot of light control purposes and sometimes serves as a good wind block. There are cheaper ones, but Kevin Sadler talked me into spending more money to get a quality product and I haven't regretted it.
When all else fails, I resort to flash to get the shot. I greatly dislike using flash and only use it when I want a shot and know that it's get it now or never. If I can come back and get the shot at a calmer time without flash, I will. I do use flash on occasion if I feel that the shot needs a little spark of light, but generally not. Flash is always used on a remote cord and diffused in some way, either with the wide-angle diffuser that's built into it, or by shooting through or bouncing it off of my multidisc.
As for shooting technique, a tripod is a must. I have two, but the one I use for flower shots allows me to splay the legs out and get the camera very low and/or allows me to reverse the column (I bought a short column to replace the one that came with the tripod) and hang the camera upside down. I use a ball head with a quick release. I also almost always use a remote release and frequently use mirror lock up. It's amazing how many images I've ruined because I moved the camera by pushing the shutter button or vibration from the mirror cause the slightest blur.
But above all, getting flower shots just requires a lot of patience. Hope all of this rambling helps.
Gary
2011 Free Gun Wallpapers - Enjoy
bach007
12-03 06:26 AM
What your lawyer says in incorrect. I have had my visa stamped successfully only for 3 months validity in the past. Even this time I have only 2 months left (until Feb 2008) but am still going for stamping. So do not worry. As long as you have one more day left, you can get it stamped. Good luck.
I would very much appreciate if I could get your input in the following situation.
I have plans to travel on 7th Dec but am still waiting for my AP. The AP was aproved on 6th Nov along with my spouse's AP on the same date. He got his AP (thru lawyer) about 10 days back, but I did not receive it. Chances look bleak that I will get AP before 4th Dec (by which date I need to cancel my tickets to get a refund). However, I have a I-797 which is valid till Mar 2008. I wanted to use that to get H1 stamping in India, but when I spoke to my Lawyer, I was told that I cannot do so beacuse the 797 is expiring in 3 months.
If you have a recent experience of getting H1 stamped with your I797 expiring in a few months please do reply.
I would very much appreciate if I could get your input in the following situation.
I have plans to travel on 7th Dec but am still waiting for my AP. The AP was aproved on 6th Nov along with my spouse's AP on the same date. He got his AP (thru lawyer) about 10 days back, but I did not receive it. Chances look bleak that I will get AP before 4th Dec (by which date I need to cancel my tickets to get a refund). However, I have a I-797 which is valid till Mar 2008. I wanted to use that to get H1 stamping in India, but when I spoke to my Lawyer, I was told that I cannot do so beacuse the 797 is expiring in 3 months.
If you have a recent experience of getting H1 stamped with your I797 expiring in a few months please do reply.
more...
mmk123
01-19 08:17 PM
Democrats seem to be loosing senate seat in MA. Message is clear - in this great recession, people don't want more taxes especially when they are happy with their current healthcare policies and their healthcare coverage don't change a dime for those extra taxes. Especially, when MA people are already paying for state universal healthcare. Why should WE pay for THEM?
Probably, this means healthcare reform is dead or congress embraces more conservative bill passed by senate. End of road for more tax burdensome things like cap-n-trade, climate change bill or controversial bills like immigration reform unless some less-conservative republicans are on board. If it is ever considered, be ready for more durbin-grassley measures in the final bill. Fate of the bill depends on what matters for elections in 2010, probably more populist measures like tax cuts, another stimulus, job growth measures will be focussed for rest of the year..
Probably, this means healthcare reform is dead or congress embraces more conservative bill passed by senate. End of road for more tax burdensome things like cap-n-trade, climate change bill or controversial bills like immigration reform unless some less-conservative republicans are on board. If it is ever considered, be ready for more durbin-grassley measures in the final bill. Fate of the bill depends on what matters for elections in 2010, probably more populist measures like tax cuts, another stimulus, job growth measures will be focussed for rest of the year..
chanduv23
03-16 08:55 AM
hopein07........do you know if one has to pass the evaluating exam first to get a Statement of Need from Canada for j1?...
Whats is the connection between "J1 Visa" and Canada?
Whats is the connection between "J1 Visa" and Canada?
more...
kumara121
04-08 05:05 PM
USCIS demand sheet shows 17000 GC inventory until 2006. When the EB1 spillover to EB2 is 12000, don't understand how the dates moved less than 2 months. It looks like USCIS is very confused and making us all confused.
only good thing here is some movement is much much better than nothing.
only good thing here is some movement is much much better than nothing.
2010 wallpapers guns. wallpaper
learning01
04-06 10:11 PM
There is no serious effort by the republicans. They are fractured, divided, into groups. They have no motivation to get this comprehensive bill passed. I have been observing the tactics and attitudes of these republican senators and democratic senators. I am more shocked by the game of one-upmanship on the part of Frist, Kyl, Cornyn, Craig. I don't see rhyme or reason in their sppeches. The bill has no life for the next 3 weeks.
i am sorry..i couldnt follow todays proceedings..whn i cam to iv site in the evening..everyone says bill is dead
whn i went to immigration-law.com, they say the following
cud someone tell me which one is true??????????
We reported earlier the Senate Republican Members Agreement last night. Today, the Democratic Minority Leader and other Democractic leaders agreed to the proposal, turning the Republican agreement into the Bi-Partisan Agreement. This dramatic break-through opens a door to the possibility of passing the Senate version of Comprehensive Immigration Reform bill, S. 2454, as amended before this week is over and before the Congress goes into the recess next two weeks.
The development is accompanied by three other developments:
President released statement supporting the bi-partisan agreement;
Senate rejected the Democrat's motion to cloture for the Specter amendments to S.2454;
Senate also relected the Republican Kyl' motion for his amendments.
Now we see the light at the end of the tunnel!!
i am sorry..i couldnt follow todays proceedings..whn i cam to iv site in the evening..everyone says bill is dead
whn i went to immigration-law.com, they say the following
cud someone tell me which one is true??????????
We reported earlier the Senate Republican Members Agreement last night. Today, the Democratic Minority Leader and other Democractic leaders agreed to the proposal, turning the Republican agreement into the Bi-Partisan Agreement. This dramatic break-through opens a door to the possibility of passing the Senate version of Comprehensive Immigration Reform bill, S. 2454, as amended before this week is over and before the Congress goes into the recess next two weeks.
The development is accompanied by three other developments:
President released statement supporting the bi-partisan agreement;
Senate rejected the Democrat's motion to cloture for the Specter amendments to S.2454;
Senate also relected the Republican Kyl' motion for his amendments.
Now we see the light at the end of the tunnel!!
more...
JDM
08-05 10:01 PM
/\/\/\/\/\/\
hair Free Guns Wallpapers | Free
meridiani.planum
06-15 11:10 PM
I have a masters degree in mechanical engineering and I have been working as a system analyst for the last 2 years, does anybody here can advise if I can apply for EB2?
If yes what are the chances that there would be an RFE asking why is masters needed, I do think having done my masters i am able to understand and do the job better, but there is really no specif need for it.
Has anyone else gone through this confusion? What are the things to keep in mind?
Is there a special need how the job requirement should be?
Please advise.
Thanks
education and experience requirements are tied to a position, not to the person. So the LC is going to look into whether the position of a systems analyst requires a masters, and if it does what kind (as the minimum requriements). At I-140 they see if YOU match the position for which the LC has been approved. If the LC said systems-analyst needs a masters in computer-science or electrical engineering, then you will have a problem.
You can potentially get two questions in the RFE:
- why does the job need a Masters (EB2 justification for LC)
- why does a masters in mechanical engineering satisfy the requirement of a masters for a system analyst position (whether you meet the requirement, at I-140 stage).
Since you yourself say the position does not require a masters, proviing it needs a masters in mech. engg might be even harder. Did you ask your company attorney about this? what do they say?
If yes what are the chances that there would be an RFE asking why is masters needed, I do think having done my masters i am able to understand and do the job better, but there is really no specif need for it.
Has anyone else gone through this confusion? What are the things to keep in mind?
Is there a special need how the job requirement should be?
Please advise.
Thanks
education and experience requirements are tied to a position, not to the person. So the LC is going to look into whether the position of a systems analyst requires a masters, and if it does what kind (as the minimum requriements). At I-140 they see if YOU match the position for which the LC has been approved. If the LC said systems-analyst needs a masters in computer-science or electrical engineering, then you will have a problem.
You can potentially get two questions in the RFE:
- why does the job need a Masters (EB2 justification for LC)
- why does a masters in mechanical engineering satisfy the requirement of a masters for a system analyst position (whether you meet the requirement, at I-140 stage).
Since you yourself say the position does not require a masters, proviing it needs a masters in mech. engg might be even harder. Did you ask your company attorney about this? what do they say?
more...
pappu
12-19 06:46 PM
core member- Ashish Sharma (eager2i) will be attending this call on behalf of the core team.
hot Sevenfold Gun Wallpaper
h1bemployee
02-25 09:03 PM
Are you for real? USCIS has nothing to do with LCA amendment. That should be DOL (Department of Labor).
thats what my employer told me....
thats what my employer told me....
more...
house Hot Gun Wallpaper
ssnd03
07-12 04:32 PM
Every guy thinks that his/her problem is always the biggest bottleneck
Eliminating FBI delays will restore FIFO and stop such visa bulletin fiascos.
It will not solve retrogression which is a bigger problem, but requires congressional action for number increases
Eliminating FBI delays will restore FIFO and stop such visa bulletin fiascos.
It will not solve retrogression which is a bigger problem, but requires congressional action for number increases
tattoo free-wallpapers-gun-038
bsbawa10
08-21 09:46 AM
I broke my politeness today.USCIS inconsistency broke the limits for me.
My case was filed in Nebarska then tranferred to Texas then as soon as the priority date became current, last month, it was transferred to California.
I talked yesterday to customer service and it by chance got transferred to California Service Center where the officer told me that my case was transferred back to Texas Service Center on August 14, 2008. She also told me to call TSC to confirm it.
I called today the National Customer Service Center (NCSC) to confirm it and the lady tells me that the case is still in California and she has no more infomation about it. I told her about my call yesterday.
Lady: How could you have ever called CSC because their phone numbers are not public
Me: I called the same number and for some reason it got transferred to CSC.
Lady: Then you have already been told that your case has been transferred back on Aug 14, what do you need now ?
Me: The website does not show that. Plus the officer yesterday asked me to confirm it which you are not doing, you are just repeating my words about my conversation. There are so many inconsitencies . You told me just now that my case is still in California.
Lady: Can you please hold for a moment.
After hold:
Lady: I just talked to my supervisor, if the website says it is in California then it is California. Is there anything else I can help you with ?
Me: I do not understand "To speed up processing " clause in the reason to transfer it to california. It has been transferred from the center which is processing 485 applications to the center which is not processing applications. So the clause "To speed up processing" is so inconsistent.
Lady: Sir, we cannot tell you the reason why do we transfers
Me: But you have already told me the reason in the written notice as "To speed up processing"
Lady: It is not "To speed up processing " it is "for processing". Is there anything else that I can help you with ?
Me: I hang up the phone.
My case was filed in Nebarska then tranferred to Texas then as soon as the priority date became current, last month, it was transferred to California.
I talked yesterday to customer service and it by chance got transferred to California Service Center where the officer told me that my case was transferred back to Texas Service Center on August 14, 2008. She also told me to call TSC to confirm it.
I called today the National Customer Service Center (NCSC) to confirm it and the lady tells me that the case is still in California and she has no more infomation about it. I told her about my call yesterday.
Lady: How could you have ever called CSC because their phone numbers are not public
Me: I called the same number and for some reason it got transferred to CSC.
Lady: Then you have already been told that your case has been transferred back on Aug 14, what do you need now ?
Me: The website does not show that. Plus the officer yesterday asked me to confirm it which you are not doing, you are just repeating my words about my conversation. There are so many inconsitencies . You told me just now that my case is still in California.
Lady: Can you please hold for a moment.
After hold:
Lady: I just talked to my supervisor, if the website says it is in California then it is California. Is there anything else I can help you with ?
Me: I do not understand "To speed up processing " clause in the reason to transfer it to california. It has been transferred from the center which is processing 485 applications to the center which is not processing applications. So the clause "To speed up processing" is so inconsistent.
Lady: Sir, we cannot tell you the reason why do we transfers
Me: But you have already told me the reason in the written notice as "To speed up processing"
Lady: It is not "To speed up processing " it is "for processing". Is there anything else that I can help you with ?
Me: I hang up the phone.
more...
pictures Silver Pistol Wallpaper
a1b2c3
12-04 08:30 PM
Stay safe folks, be watchful and good luck.
Don't give in to terrorism, they want to scare you more than kill you.
Don't give in to terrorism, they want to scare you more than kill you.
dresses Emotional gun wallpaper
obelix
03-02 11:28 AM
Hi All,
I just wanted to get a second opinion on my situation. I would really appreciate if you can share your thought.
I work for a typical consulting company but luckily has been working for the same client for 3yrs with a vendor in the middle. I've got paid all the time without any issue. My visa (H1B) is due to expire in Sept 2010. I have valid visa till that time.
I was just evaluating if I would be better off filing my extension in April (1st week) as I can do 6month ahead of the start date or should I wait. Another point to note is - I'm getting married in June so I need to visit India for about a month and coming back in July. So, I can start processing after that too.
My personal preference is to file for extension in April with Premium Processing and hopefully I get new valid I-797. Go for stamping while I'm India for another 3yrs and also have my wife get H4 visa. I think this would be an ideal situation for me.
Does anybody see any issue in the plan? What would you do if you are under similar situation?
I would really appreciate if you can share your insight or similar experience. I would be happy to share more information if needed.
Thanks,
I just wanted to get a second opinion on my situation. I would really appreciate if you can share your thought.
I work for a typical consulting company but luckily has been working for the same client for 3yrs with a vendor in the middle. I've got paid all the time without any issue. My visa (H1B) is due to expire in Sept 2010. I have valid visa till that time.
I was just evaluating if I would be better off filing my extension in April (1st week) as I can do 6month ahead of the start date or should I wait. Another point to note is - I'm getting married in June so I need to visit India for about a month and coming back in July. So, I can start processing after that too.
My personal preference is to file for extension in April with Premium Processing and hopefully I get new valid I-797. Go for stamping while I'm India for another 3yrs and also have my wife get H4 visa. I think this would be an ideal situation for me.
Does anybody see any issue in the plan? What would you do if you are under similar situation?
I would really appreciate if you can share your insight or similar experience. I would be happy to share more information if needed.
Thanks,
more...
makeup Airsoft Gun Wallpaper at
sabudanawada
02-27 03:20 PM
once EB3 Row gets current, some relief can be expected for the retrogressed countires where unused visas can be assigned...
before 2007, lot of labor substitution cases are in picture, also people with multiple LC's too...
the actual no. will be smaller...it just depends on how proactively they will manage to capture the unused numbers etc..that will matter the most.
About 25,000 PERM labors were approved in 2007 for Indian nationals. Assuming a 2.5:1 ratio of 'GC filed:Labor approved', implies that each year 62,500 GC are demanded by Indians under EB. Since only 10,000 are available (across all EB classes), this implies each year a backlog of 50,000 cases is created for Indians.
Since PD are essentially retrogressed from Nov. 2005, we can assume that since then another 100,000 Indians have joined the GC backlog. It can also be assumed that between 2001 and Nov. 2005 there must be another (atleast) 50,000 waiting for GC.
Assuming these numbers are correct, a person filing for labor today is looking to wait for atleast 15 years before getting a GC (150,000/10,000).
As for those wth PD prior to Nov. 2005 - well..... probably anywhere between 1 to 5 years .....
Comments on the analysis.........?
before 2007, lot of labor substitution cases are in picture, also people with multiple LC's too...
the actual no. will be smaller...it just depends on how proactively they will manage to capture the unused numbers etc..that will matter the most.
About 25,000 PERM labors were approved in 2007 for Indian nationals. Assuming a 2.5:1 ratio of 'GC filed:Labor approved', implies that each year 62,500 GC are demanded by Indians under EB. Since only 10,000 are available (across all EB classes), this implies each year a backlog of 50,000 cases is created for Indians.
Since PD are essentially retrogressed from Nov. 2005, we can assume that since then another 100,000 Indians have joined the GC backlog. It can also be assumed that between 2001 and Nov. 2005 there must be another (atleast) 50,000 waiting for GC.
Assuming these numbers are correct, a person filing for labor today is looking to wait for atleast 15 years before getting a GC (150,000/10,000).
As for those wth PD prior to Nov. 2005 - well..... probably anywhere between 1 to 5 years .....
Comments on the analysis.........?
girlfriend gun wallpapers. wallpaper
mammoy2k
11-13 05:49 PM
you will need to come back to atleast get AP approvals (AP expires every year), and if you are served a fingerprint notice, then come back for that. If you are going to be definately out for the next few years, another option is to do consular processing; talk to a lawyer it depends a lot on your specific case.
Due to work, I would be in the US at least once every quarter. So I dont think that finger printing or AP renewal is a problem, as long as I can get an address where these notices come.
Thanks for your response.
Due to work, I would be in the US at least once every quarter. So I dont think that finger printing or AP renewal is a problem, as long as I can get an address where these notices come.
Thanks for your response.
hairstyles free-wallpapers-gun-121.
honge_kamyaab
11-30 09:24 AM
Remember I-140 is owned by your employer. If you quit the job your greencard process will start from PERM again with your new employer.
Portability applys six months after filing I-485.
Hope that helps.
Portability applys six months after filing I-485.
Hope that helps.
485Mbe4001
07-25 12:11 PM
Nice...Calculations work if its a public company with a responsibility to make profits and please shareholders. We are talking about an entity we really know nothing about, all calculations go out of the window in this case
-- I filed my 485 in dec 2004 :p i have spent many hours dreaming up rational calculations, but i feel i would have been better off watching the traffic from my office window.:(
Here is the calculation I came up with USCIS processing of our I-485 applications.
USCIS should allocate 140,000 applications in a fiscal year. So, in a month they need to process, at least, 140,000/ 12 = 11,667 applications.
Assuming that they have, at least, 20 working days in a month, they need to process 11,667/ 20 = 584 applications.
So, now the question is, how many employees does USCIS have and are dedicated to the I-485 processing? We don’t know the exact number. Considering that USCIS is getting lot of revenue, they should have, at least, 50 employees doing this work.
So, 584/50 = 12(Approx) applications they need to process in a day, per person.
So, do you think it is viable? Of course, it is…
What they need to process the I-485 application? They are not doing any FBI names check, or background check (Assuming that everything is done by other organization). So, how long does it take to review the I-485 application? Well, when I filled the application, it took me about 1 hour. So, to review it, let’s us say, it takes about 1/2 the time fill the application; that’s about half an hour. Considering the calculation that we made, it takes an about 6 hours to process 12 candidates. With this assumption, they still have 2 hours left to do miscellaneous tasks. Now the question is what the heck they are doing all the time? Why did they process only 80,000 applications in about 8 months? Are they lazy? Don’t they have enough employees (This shouldn’t be; an average Indian consultant company will have at least 20 employees!!). This is really a mystery. Anyways, if the USCIS really and whole heartedly wants to process the applications, they can; but they really don’t care about immigrants or their plights. :rolleyes:
-- I filed my 485 in dec 2004 :p i have spent many hours dreaming up rational calculations, but i feel i would have been better off watching the traffic from my office window.:(
Here is the calculation I came up with USCIS processing of our I-485 applications.
USCIS should allocate 140,000 applications in a fiscal year. So, in a month they need to process, at least, 140,000/ 12 = 11,667 applications.
Assuming that they have, at least, 20 working days in a month, they need to process 11,667/ 20 = 584 applications.
So, now the question is, how many employees does USCIS have and are dedicated to the I-485 processing? We don’t know the exact number. Considering that USCIS is getting lot of revenue, they should have, at least, 50 employees doing this work.
So, 584/50 = 12(Approx) applications they need to process in a day, per person.
So, do you think it is viable? Of course, it is…
What they need to process the I-485 application? They are not doing any FBI names check, or background check (Assuming that everything is done by other organization). So, how long does it take to review the I-485 application? Well, when I filled the application, it took me about 1 hour. So, to review it, let’s us say, it takes about 1/2 the time fill the application; that’s about half an hour. Considering the calculation that we made, it takes an about 6 hours to process 12 candidates. With this assumption, they still have 2 hours left to do miscellaneous tasks. Now the question is what the heck they are doing all the time? Why did they process only 80,000 applications in about 8 months? Are they lazy? Don’t they have enough employees (This shouldn’t be; an average Indian consultant company will have at least 20 employees!!). This is really a mystery. Anyways, if the USCIS really and whole heartedly wants to process the applications, they can; but they really don’t care about immigrants or their plights. :rolleyes:
leoindiano
07-09 01:34 PM
looks like TSC is the one worked so hard to drain 485 apps and taking rest now....:)
No comments:
Post a Comment